Flashgraf; Sonar Simulator - Lowrance X125 Operation Instructions Manual

change. When the selected window title bar flashes, press
to select data type|
tomizing, then press

FlashGraf

The FlashGraf sonar page option represents a flasher style sonar com-
bined with a scrolling chart. A circular dial shows all returning echoes
at a high screen refresh rate.
It uses the Grayline feature to show weaker targets as shades of gray.
The bottom depth is also shown as a black bar across the outer circle.
There is also a narrow chart display on the left of the screen.

Sonar Simulator

This unit has a built-in simulator that lets you run it as if you were on
the water. All sonar features and functions are useable. When in
simulator mode, you will see [Simulator Mode] in the Sonar Page title
bar. To use the simulator:
1. From the Sonar Page, press
2. Turn off Sonar Simulator by pressing
|
S ENT
IMULATOR
NOTE:
If you turn on your unit before attaching a transducer, it may enter
a demo mode. The words "demo mode" flash on the bottom of the
screen and a sonar chart plays much like the simulator. Unlike the
simulator, the demo mode is for demonstration only, and will auto-
matically stop as soon as you turn on the unit with a transducer at-
tached. The simulator will continue to function normally.
. Repeat these steps until you're finished cus-
ENT
EXIT
FlashGraf page.
| .
EXIT
to return to the Sonar Page.
|
MENU MENU
73
Bottom signal
|↓ to
S S
ONAR IMULATOR
|
MENU MENU
|↑ or ↓
ENT
Surface clutter
Fish signal,
approximately
16 feet
| .
ENT
|↓ to
S
ONAR