Lowrance X125 Operation Instructions Manual page 28

Fish-finding & depth sounding sonars
Hide thumbs Also See for X125:
Table of Contents

Advertisement

lead, black is negative or ground. Make sure to attach the in-line fuse
holder to the red lead as close to the power source as possible.
For example, if you have to extend the power cable to the battery or
power buss, attach one end of the fuse holder directly to the battery or
power buss. This will protect both the unit and the power cable in the
event of a short. It uses a 3-amp fuse.
To unit
CAUTION:
Do not use this product without a 3-amp fuse wired into the power
cable! Failure to use a 3-amp fuse will void your warranty.
This unit has reverse polarity protection. No damage will occur if the
power wires are reversed. However, the unit will not work until the
wires are attached correctly.
An optional 8-foot, CA-4 external power cable with a cigarette lighter
adapter is available from Lowrance.
Black wire
Power connections for the sonar unit.
Optional power off switch for
saltwater installations
12 volt
battery
24
Red wire with
3 amp fuse

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

X126dfX135X136df

Table of Contents