Lowrance X125 Operation Instructions Manual page 54

the depth range. This feature lets you "zoom in" the display in almost
unlimited combinations. Nearly any segment of the water column, from
the surface to the bottom can be shown. This enlarges the sonar targets
to best suit your fishing needs and water conditions.
At left, Sonar Page Menu with Upper and Lower Limits command se-
lected. At right, Sonar Chart Limits menu, with Upper Limit selected.
To change the upper and lower limits:
1. From the Sonar Page, press
The Sonar Chart Limits menu appears, with Upper Limit selected.
2. To set the upper limit, press
number, then press → to move the cursor to the next number and re-
peat until the depth is correct, then press
3. To set the lower limit, press ↓ to
change the first number, then press → to move the cursor to the next
number and
| |
EXIT EXIT EXIT
Area "zoomed"
Normal display, in auto depth range mode, left. At right, display
"zoomed" with Upper and Lower Limits focusing on the portion of the
water column from 20 feet to 40 feet deep. In the "zoomed" image, note
the target definition at lower left, showing a fish holding just above the
structure. At top right, two game fish are attacking a school of bait fish.
repeat until
.
|↓ to
MENU U
PPER
. Press ↑ or ↓ to change the first
ENT
EXIT
L L
OWER
the depth
Fish arches
50
A L
ND OWER
.
. Press ↑ or ↓ to
|
ENT
IMIT
is correct,
| .
L ENT
IMITS
then press