How To Adjust A Settings - HANNspree HP278WJB User Manual

HOW TO ADJUST A SETTINGS

BRIGHTNESS / CONTRAST
BRIGHTNESS
CONTRAST
PRESET MODE
ACTIVE CONTRAST
LOW BLUE LIGHT
IMAGE
H-POSITION
V-POSITION
CLOCK
PHASE
SHARPNESS
ASPECT RATIO
Adjust the brightness value of the display according to your
preference. Select BRIGHTNESS option to adjust the
brightness value.
Adjust the contrast value of the display according to your
preference. Select CONTRAST option to adjust the contrast
value.
Select the preset mode according to your preference: PC/
MOVIE/ GAME/ ECO
[The availability of this function depends upon the selected
model]
Optimal setting for high contrast images or videos. The dark and
light areas of the image are automatically detected, and the
contrast is enhanced to provide a clearer, sharper image. Also,
you may select the ACTIVE CONTRAST option.
Select the LOW BLUE LIGHT option to adjust the low blue
light of the display.
Select the H-POSITION option to shift the screen image to the
left or right. Enter the option and adjust the level.
Select the V-POSITION option to shift the screen image up or
down. Enter the option and adjust the level.
Select the CLOCK option to reduce the vertical flicker of
characters on the screen. Enter the option and adjust the level.
[For VGA only]
Select the PHASE option to reduce the horizontal flicker of
characters on the screen. Enter the option and adjust the level.
[For VGA only]
Select the SHARPNESS option to adjust the sharpness of the
display. Set the value from 0 to 100.
When the aspect ratio of screen is distorted, you may make
adjustments by using this function. WIDE indicates full screen
display, which does not ensure the image is shown as is or in
initial scale. 4:3 indicates scaling by the proportion of original
images, which may cause the screen showing black bands.
15
User's Manual