Table of Contents
Advertisement
AUTO POWERDOWN
MISC
SIGNAL SOURCE
DDC/CI
MUTE
VOLUME
AUDIO INPUT
RESPONSE TIME
This will erase the current settings.
Select the
DDC/CI option to switch the function On or Off.
Select the
INPUT SETTING option to change between
Digitalg (DP) or Digital (HDMI) source. Enter the option and
select Analog or Digital.
Select the
DDC/CI option to switch the function On or Off.
Select the MUTE option to switch the function On or Off.
availability of this function depends upon the selected model.
Adjusting the volume while muted cancels Mute mode.]
Select the
VOLUME option to change the volume level. Enter
the option and adjust the level.
models with incorporated audio.]
● By high volume, risk of hearing damage exists.
While transferring via the HDMI port, it is recommended to set
AUDIO INPUT to HDMI; if no sound is outputted, it is
recommended to select AUDIO INPUT as PC, and make sure the
PC audio output cable is connected to monitor's LINE IN (or
AUDIO IN) port.
[For HDMI Input only]
Setup the display response time through the Response time
function. Available settings are MINIMUM,
INTERMEDIATE, and MAXIMUM.
specific models only.]
17
User's Manual
[This function applies only to
[This feature is limited to
[The
Advertisement
Table of Contents
