Yard Art Alta Girona FT-395 Assembly Instructions

Fountain Components

Image
Item Description
Water Feature
Fountain - Disc
Fountain - Basin
Assembly & Installation - A fountain can be difficult to install without knowing and understanding the steps involved. To ensure your fountain is
installed properly, please read our instructions and tips before you begin.
Step 1 - Seek Professional Help: Check if professional installation is recommended for your fountain.
Step 2 - Check Foundation: Place your fountain on a level surface. It is recommended to place your fountain on concrete or a hard packed
gravel pad. If the base is level but some components seem off, rotate components or use wedges to level them.
Step 3 - Create a Drip Loop: To prevent water from dripping down the cord and damaging the electrical socket, create a drip loop by allowing
the pump power cord to fall below the wall outlet.
Step 4 - Use a GFCI Outlet: Use only a GFCI outlet when running a fountain.
Component
Quantity
Item #
Large Girona
Fountain FT-300A
Alta Girona
FT-395B
Alta Girona
FT-395C

Fountain Set-Up:

FT-395 Alta Girona Fountain

Fountain Information:

• This fountain holds approximately 55 gallons of water.
• This fountain uses a medium fountain cover: FTNCOV-MED
• Compatible with Refill #10 Device
• (A different style stopper may be requested for this part)

Pump Information:

OEMPF800 - 800 GPH Pump 16 FT cord length

Tools Required:

Bubble Level
Screwdriver
Image
1
1
1
Assembly Instructions

Pump Kit Parts List

Component
PK800 Pump
(use adapter indicated)
#10 Stopper
Approx. 25" length of 5/8" black
non-kink tubing
Approx. 3" length of 7/8" clear vinyl
tubing
Wedges
Hose Clamps
Proudly
MADE IN USA
Quantity
1
1
1
1
3
1
rev 6/30/2022