Table of Contents
Advertisement
7) Install the freezer door on the middle hinge, and install the upper hinge, hinge cover and hole
cover.
hinge cover
screw
upper hinge
(The picture above is only for reference.The actual configuration will depend on the physical product
or statement by the distributor)
2 4 Changing the Light
.
Any replacement or maintenance of the LED lamps is intended to be made by the manufacturer, its
service agent or similar qualified person.
2.5 Starting
545mm
135°
929mm
2.6 Energy saving tips
The appliance should be located in the coolest area of the room, away from heat producing
appliances or heating ducts, and out of the direct sunlight.
Let hot foods cool to room temperature before placing in the appliance. Overloading the appliance
forces the compressor to run longer. Foods that freeze too slowly may lose quality, or spoil.
Be sure to wrap foods properly, and wipe containers dry before placing them in the appliance.This
cuts down on frost build-up inside the appliance.
Appliance storage bin should not be lined with aluminum foil, wax paper, or paper toweling. Liners
interfere with cold air circulation, making the appliance less efficient.
Organize and label food to reduce door openings and extended searches. Remove as many items
as needed at one time, and close the door as soon as possible.
Before initial start, keep the refrigerator still for two hours before connecting it to
power supply.
Before putting any fresh or frozen foods, the refrigerator shall have run
for 2-3 hours, or for above 4 hours in summer when the ambient
temperature is high.
Spare enough space for convenient opening of the doors and drawers or
statement by the distributor.
10
hole cover
Advertisement
Table of Contents
