OPERATION
Start Cold Engine
Do not start engine unless chain brake is LOCKED (forward
◆
position).
After choke control knob is turned and the knob returned
◆
to original position, throttle will remain slightly open (latch
condition).
If engine is started in this latch condition, chain starts to
◆
turn. Make sure bar and chain are free from any
obstruction when chainsaw is started.
Failure to follow instructions can cause serious injury.
◆
After engine starts, immediately squeeze and release
◆
throttle trigger to disengage throttle latch and return
engine to idle, and pull front hand guard towards the
operator immediately. (Chain brake RELEASED position).
Do not increase engine speed while chain brake is
◆
engaged.
Use the chain brake only to start engine or stop the chain
◆
in emergencies.
Never use throttle latch for cutting. Use it only when
◆
starting the engine.
1.
Move chain brake lever (A) fully
FORWARD to LOCK chain
brake before starting.
2.
Fill the fuel tank with fuel
mixture. Do not over fill.
3.
Fill the chain oil tank with
lubricant. Do not over fill.
32
CS-2511PN
A
X7503334500
© 11/22 ECHO Incorporated