Formatted Capacity; Lba Mode; Recording And Interface Technology; Start/Stop Times - Seagate Exos Enterprise 7E8 Product Manual

2.2

Formatted capacity

ST models
ST6000NM0235
*One GB equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and formatting.
2.2.1

LBA mode

When addressing these drives in LBA mode, all blocks (sectors) are consecutively numbered from 0 to n–1, where n is the number of
guaranteed sectors as defined above.
See Section 4.3.1, "Identify Device command" (words 60-61 and 100-103) for additional information about 48-bit addressing support
of drives with capacities over 137GB.
2.3

Recording and interface technology

Interface
Recording method
Recording density, KBPI (Kb/in max)
Track density, KTPI (ktracks/in avg)
2
Areal density (Gb/in avg)
Spindle speed (RPM) (± 0.2%)
Internal data transfer rate (Mb/s max)
Maximum Sustained data transfer rate (MiB/s)
I/O data-transfer rate (MB/s max)
2.4

Start/stop times

Power-on to Ready (sec) (typ/max)
Standby to Ready (sec) (typ/max)
Ready to spindle stop (sec) (max)
Seagate Exos 7E8 Serial ATA Product Manual, Rev. A
Formatted
Guaranteed sectors
capacity*
6TB 11,721,045,168
23/30
23/30
23
Bytes per logical sector
512
Serial ATA (SATA)
Perpendicular
2226
375
802
7200
2546
205
600 (Ultra DMA mode 5)
8