Advertisement
down keys to scroll through the main menu. When
center square — like the illustration below — press MENU. That will
open the Timeout Menu, which has four settings: 3, 5, 7 and 10 seconds.
To choose a setting, use the up and down keys and press
Center
square
Timeout in the center square on the main menu (left) will take you to the
Timeout menu. All items on the main menu (except Rev Video) will func-
tion in the same way. The Timeout menu (right).
LDT 3200 Menus
The unit has 11 menus. To access a menu, press
and down keys to scroll it into the center square, then press
The menus are: AutoScroll; Backlight; Contrast; Options; Pages; Rev
Video; Set Alarm; Set Time; Set Units; Timeout; and System
Pages
When you first start using the gauge it will display the Temperature
page by default. But there are three other pages: the Voltmeter page,
Dual Display page and Clock page. You can cycle through the pages
manually or set them to be displayed at various intervals with the
AutoScroll menu, discussed on page 8.
To cycle through the pages manually, press the up or down keys. The
Clock page is the only page not set for display by factory default.
Temperature Page (left) and Voltmeter Page (right).
7
appears in the
T
IMEOUT
.
MENU
Timeout
internal
menu
and use the up
MENU
MENU
.
Advertisement
