Advertisement
2 SETUP
6
Warning
Danger of accidents A repaired handlebar poses a
safety risk.
If the handlebar is bent or straightened, the mate-
rial becomes fatigued. The handlebar may break
as a result.
–
E00483-01
–
Position the handlebar.
Info
Make sure the cables and wiring are positioned cor-
rectly.
–
Position the handlebar clamps. Mount and tighten the
screws evenly.
Guideline
Screw, handlebar
clamp
Info
The markings on the handlebar should be at the
center of the handlebar clamps.
Keep the installed gap widths equal when tighten-
ing.
(EXC‑F Six Days)
–
Remove screws
–
Move the handlebar supports to the desired position and
mount and tighten screws
Guideline
Screw, handle-
bar holder
Info
Position the left and right handlebar supports
evenly.
S01415-10
Change the handlebar if the handlebar is dam-
aged or bent.
M8
3
and take off the handlebar supports.
3
.
M10
40 Nm (29.5 lbf ft)
20 Nm
(14.8 lbf ft)
Loctite
®
243™
Advertisement
