Download Print this page

WESTECH SMART BMS Series Instructions For Use Manual page 14

Lifepo4 battery

Advertisement

�.� Charging voltage
Recommended charging voltage: ��.�V
Constant voltage duration: � hours for a ���% charge, or a few minutes for a ��%
charge.
Maximum charge voltage: ��.�V per battery.
Recommended storage voltage: around ��V per battery.
�.� Cell voltage to « allow discharge »
The threshold below which battery discharge is not authorized is �.�V as standard.
�.� Minimum temperature to « allow charging »
By default, the threshold at which a low temperature alarm is triggered is �° C.
�.� Conditions for series and parallel connection
The batteries must be of the same batch and of the same model.
Before connecting the batteries in series or parallel, please charge them fully.
�.Technical Support
If you have any questions regarding the purchase or use of the bat-
tery, we will be happy to assist you.
Westech-Solar Energy GmbH,
info@westech-energy.com, www.westech-energy.com
Robert-Bosch-Str. 11,85748 Garching,
+49 (0) 89-89545770

Advertisement

loading

This manual is also suitable for:

42584258-1