Advertisement
�.� Verification
After receiving the LiFePO� battery, please check if the device has been damaged in any way
(e.g. transportation). In this case, please do not put the device into operation and contact
the seller.
�.� The installation conditions
As long as the battery holders are already available and suitable, they can continue to be
used. Make sure that the LiFePO� battery is installed and fixed so that it cannot move back
and forth during use (tension the strap).
�.� Debug
Due to variations in operating temperature and charge-discharge rate, the cycle capacity
may be different from the nominal capacity. Do not disassemble the battery. Parallel and
series are acceptable, depending on the battery. In parallel, it can accept �� parallels. In
series, it can accept up to � series. The series and parallel structure can accept up to �S�P.
The operating temperature :
Discharge temperature: -�� ~ ��°C
Storage temperature: -� ~ ��°C
Charge temperature: � ~ ��°C
�.� Protection against short circuits
Single battery installation
The battery must be protected by a fuse.
10
Advertisement
