Advertisement
�.Use of the battery
�.� Charge and discharge
The LiFePo� battery charges quickly. The time is considerably reduced. There are no long
waiting times. Since there is no memory effect with this battery, it does not always need to
be fully charged. The service life tends to increase if the battery is not always fully charged.
The recommended charging voltage is ��.�V.
The lead-acid battery charger can be used, but it is recommended to use a dedicated lithi-
um battery charger.
Do not exceed the maximum permitted charge voltage.
Use the battery only within the specified temperature range.
The final charge voltage of the battery measured ��.�V at the battery pole.
Use only DC chargers suitable for regulated load characteristics.
Only switch on the charger after connecting the charger to the battery. After charging,
please first turn off the charger, then disconnect the battery from the charger.
If necessary, the battery management system (BMS) will automatically balance the bat-
tery charge. Due to the high discharge current and the short charging time, the battery
of the battery can lose balance during a long service life. This can cause a loss of ca-
pacity and overload the unit. This battery balancing can be performed in charge and
rest modes.
12
Advertisement
