Download Print this page

WESTECH SMART BMS Series Instructions For Use Manual page 12

Lifepo4 battery

Advertisement

�.� Charging the battery before use
The battery is fully charged to approximately ��% when shipped from the factory. It is
recommended to fully discharge and charge the new battery before use.
�.� Maintenance
No direct maintenance is required. To maintain the battery, keep the connection electrode and
the surface clean, tighten the clamp and lightly grease. Use at least once every three months to
maintain the battery and calibrate the state of charge.
�.� Storage
The Li-ion battery pack should be stored in a cool, dry and well-ventilated area, and
should be far from the fire and the high temperature.
The best Voltage in storage is ��.�V~��.�V.
The battery should be stored in the temperature range of the product specification. The
best storage temperature is �~��°C. The best humidity is �� ± ��%.
If there is a long storage period of more than � months, it must charge and discharge the
battery extra.
�.� Transportation
Do not mix the battery products with other cargo.
Do not immerse the battery products in water or get it wet.
The maximum temperature during transportation is below ��°C.
11

Advertisement

loading

This manual is also suitable for:

42584258-1