Beko RS 2121 User Manual page 36

3 Operation
3.3 Start Up
3.3.1 Automatic cleaning
AUTO
Press the "AUTO" button on
the appliance.
3.3.2 Edge cleaning
MODE
Press the "MODE" button
on the remote controller until
"MODE1" is displayed on the
screen.
36 / EN
ON/OFF
Or; press the "Start/stop"
button on the remote control
(15) or the mobile application.
MODE1
The device will switch to
cleaning mode.
Cleans the entire area following
a zigzag cleaning route. At the
end of cleaning, the robot will
return to the charging station.
The appliance will switch to
cleaning mode. The appliance
cleans the edges of the wall
and remains clear of the
charging unit (14) to avoid
crashing during operation.
At the end of cleaning, the
appliance will return to the
charging unit.
Robot Vacuum / User Manual