Install Memory - JETWAY 865GF User Manual

2-4 Install Memory

This motherboard provides
sites for memory expansion available from minimum memory size of 64MB to maximum
memory size of 2.0GB DDR SDRAM.
WARNING! Due to Intel 865 chipset specification limitation this motherboard can not support
8Mx16/16Mx16/32Mx16 Double Side memory Module.
Valid Memory Configurations
Bank
Bank 0, 1 (DDR1)
Bank 2, 3 (DDR2)
Total
Generally, installing DDR SDRAM modules to your motherboard is very easy, you can refer
to figure 2-4 to see what a 184-Pin DDR200/DDR266/DDR333/DDR400 DDR SDRAM
module looks like.
NOTE! When you install DIMM module fully into the DIMM socket the eject tab
should be locked into the DIMM module very firmly and fit into its indention
on both sides.
WARNING! For the DDR SDRAM CLOCK is set at 200MHz, use only DDR400-compliant
DDR Modules. When this motherboard operate at 200MHz, most system will
not even boot if non-compliant modules are used because of the strict timing
issues, if your SDR Modules are not DDR400-compliant, set the DDR
SDRAM clock to 166MHz to ensure system stability.
two 184-pin DUAL INLINE MEMORY MODULES (DIMM)
184-Pin DIMM
DDR200/DDR266/DDR333/DDR400
DDR SDRAM Module
DDR200/DDR266/DDR333/DDR400
DDR SDRAM Module
System Memory (Max. 2.0GB)
PCS
X1
X1
9
Total Memory
64MB∼1.0GB
64MB∼1.0GB
2 64MB∼2.0GB
Figure 2-4