Table of Contents
Advertisement
STEP 6 Remove the film inside the door
B
STEP 7 Power on
Plug the power cord into an AC 120 V / 60 Hz / 15 AMP approved electrical outlet
protected by a fuse or circuit breaker. Then, press POWER to turn on the washer.
Wall standpipe drain system
The drain hose must be placed into a wall
standpipe drain system. To keep the end of
A
the drain hose bent, use the supplied hose
guide (A). Secure the guide to the wall
using a hook to ensure stable drainage.
Remove the small circle film (B) above the
door latch before use.
English 27
Advertisement
Table of Contents
