Set A Waypoint By Projecting A Position - Lowrance GlobalMap 4000M Operation Instructions Manual

3. Wait while the unit takes points to average for the position. (The greater
the number of points, the greater the accuracy.) When the desired number
of points accumulates, press
4. The Edit Waypoint menu appears. You can simply save the waypoint
by pressing
EXIT

Set a Waypoint by Projecting a Position

This feature sets a waypoint at a point located a specific distance and
bearing from a reference position. The reference position can be se-
lected from your waypoint list, a map feature or from the Points of In-
terest list.
1. Press |→ to
WPT
2. Press ↓ to
P
3. Press → to
map feature or Point of Interest. When the point has been selected,
press and the point's position appears as the reference position.
ENT
4. Press ↓ to
then press → to the next character and repeat until the distance is cor-
rect. Press
ENT
5. Press ↓ to
then press → to the next character and repeat until the bearing is cor-
rect. Press
ENT
6. Press ↑ to
can simply save the new projected waypoint by pressing
you can edit the waypoint. (Press
begin navigating to the new waypoint.)
ENT
| or you can edit the waypoint.
EXIT
S
UBCATEGORY
P
ROJECTED OSITION
C R
HOOSE EFERENCE
. Press ↑ or ↓ to change the first character,
|
D ENT
ISTANCE
.
. Press ↑ or ↓ to change the first character,
|
B ENT
EARING
.
|
P ENT
ROJECTION
to create and save the waypoint.
column|↓ to
| |→ to
ENT C
. Use ↑ and ↓ to select a waypoint,
|
ENT
. The Edit Waypoint menu appears. You
|
EXIT ENT
64
| .
N ENT
EW
| .
ENT
REATE
if you want to immediately
| or
EXIT EXIT