Care And Cleaning; Storing The Unit; Specifications - Mistral MBM604 Instruction Manual

Soda
It is similar with baking powder. It can also
used in combination with baking powder.
Other ingredients can be adding.
• Bread improver
• Dried fruit and nuts
• Dried powder milk

Care and Cleaning

Always ensure the bread maker is
switched off, has cooled down and is
unplugged from the mains supply before
cleaning. Do not immerse the bread
maker or power cord and plug in water or
any other liquid.
Exterior
• Wipe the body with a damp cloth and dry
thoroughly.
Interior
• After use, ensure the interior has cooled
and use a damp cloth to wipe out any
crumbs or flour.
Bread pan
• Wipe the bread pan with a damp cloth,
then dry thoroughly.
• If necessary fill the bread pan with warm,
soapy water and leave it to soak for an
hour. Rinse and dry thoroughly.
• Alternatively, wash the bread pan and
kneading paddle in the dishwasher.
Measuring cup and spoon
• To make cleaning easier, rinse the
measuring spoon and cup in warm, soapy
water immediately after use.
Do Not Use Any of These When
Cleaning
Paint thinner;
Benzine;
Steel wool pads;
Polishing powder;
Chemical dustcloth.
Special Care for the Non-Stick Finish
Avoid damaging the coating. Do not use metal
utensils such as metal spatulas, knives or
forks.
The coating may change colour after long use,
this is only caused by heat and moisture and
will not affect the performance of the unit or
quality of your bread.
The hole in the centre of the kneading Paddle
should be cleaned, then add a drop of cooking
oil and replace it on the spindle in the baking
pan. This will prevent sticking of the blade.
Keep all air vents and openings clear of dust.

Storing the Unit

Be sure to dry all parts before storing including
wiping any moisture from the viewing window.
Close the lid and do not store anything on top
of the lid.

Specifications:

Power supply:.................... 220-240V~ 50Hz
Power Consumption:............................550W
Note: As a result of continual
improvements, the design and
specifications of the product within may
differ slightly to the unit illustrated from
the packaging.
13