NEC MultiSync EA242WU Setup Manual page 10

Unplug the power cord if the product malfunctions.
Should the product emit smoke or strange odors or sounds, or if the product has been
1
dropped or the cabinet broken, turn off the product's power, then unplug the power cord from
UNPLUG THE
the power outlet. Contact your dealer for repairs. Never try to repair the product on your own.
POWER CORD
Doing so is dangerous.
Do not open or remove the product's cabinet.
Do not disassemble the product.
There are high voltage areas in the product. Opening or removing product covers and
HAZARDOUS
modifying the product may expose you to electric shock, fire, or other risks.
VOLTAGE
Refer all servicing to qualified service personnel.
2
DO NOT
DISASSEMBLE
PROHIBITED
Do not use the product if it has structural damage or if its stand has cracked or peeled.
If you notice any structural damage such as cracks or unnatural wobbling, please refer
3
servicing to qualified service personnel. If the product is used in this condition, the product
PROHIBITED
may fall or cause personal injury.
Handle the power cord with care.
Damaging the cord could lead to fire or electric shock.
• Do not place heavy objects on the cord.
• Do not place the cord under the product.
PROHIBITED
• Do not cover the cord with a rug, etc.
4
• Do not scratch or modify the cord.
• Do not bend, twist or pull the cord with excessive force.
• Do not apply heat to the cord.
REQUIRED
If the cord gets damaged (exposed core wires, broken wires, etc.), turn off the product's
power, then unplug the power cord from the power outlet. Ask your dealer to replace it.
Do not touch the power plug if you hear thunder.
Doing so could result in electric shock.
5
PROHIBITED
Please use the power cord provided with this product in accordance with the power cord table.
If a power cord is not supplied with this product, please contact us. For all other cases, please
use the power cord with the plug style that matches the power socket where the product is
6
located.
REQUIRED
The compatible power cord corresponds to the AC voltage of the power outlet and has been
approved by, and complies with, the safety standards in the country of purchase.
WARNING
English-2