How Do I Connect Din Cameras To The System - Lorex L20WD800 Frequently Asked Questions Manual

How do I connect DIN cameras to the system?

How do I connect DIN cameras to the system?
1. Connect the female end of the supplied DIN extension cable to the camera.
2. Connect the male end of the supplied DIN extension cable to an open DIN camera input
on the back of the System. Continue connecting additional DIN cameras.
* Camera Model may not be exactly as shown.
Benefits!
•
Easy installation
o DIN cameras get their power source from the system, so there is
6
NOTE: Confirm that the arrows on the DIN Camera
Cable and the DIN Extension cable are pointed together
when connecting the cable. If the pins in the DIN Cable
are bent, the Camera will NOT function.
no need for a power adaptor.
NOTE: The arrow on the DIN Camera
should be facing up when connecting the
DIN Extension Cable to the System. *
Camera Model may not be exactly as
shown.