Product Installation - LG CL601I Owner's Manual

Product Installation

CAUTION
•
Illustrations in this document represent typical procedures, so they may look different from the actual
product.
•
Applying excessive force when tightening screws may cause damage to the Cloud Device. Damage
caused in this way will not be covered by the product warranty.
•
The product may not be mounted on some monitors with mount bracket.
- In this case, use the product in horizontal or vertical position.
•
When connecting the peripherals after mounting the product on the monitor, be sure to hold the
product.
1. Assembling the Wifi Antenna
(Wi-Fi/Bluetooth supported models only.)
1
2-1. Mounting on the Back of the Monitor
2-A
1
2-B
x 2
1
4
2
3-A 4-A
x 4
2
3-B 4-B
x 2
3
CAUTION
•
When installing the system on the back of the monitor, please keep stability in mind. (Recommended
for monitors that weigh 6.2 kg or less.)
2-2. Assembling the Stand base
1 2
CAUTION
•
When the product is used upright, it must be tighten the stand.
Check the ID Label Slot
NOTE
•
Standard certification can be found by pulling the ID Label Slot.
Using the Kensington Lock
For more information on installation and usage, refer to the Kensington lock owner's manual or visit the
website at http://www.kensington.com.
3