Save Tab - Lorex L19LD1600 Series Instruction Manual

5. IP ADDRESS - Displays the IP Address and Port Number of the current Observation System
configuration.
6. USER ID - Enter the User ID 'ADMIN'
7. PASSWORD - Enter the Admin password for the Observation System (blank by default).
8. GET IP - Press the GET IP button to retrieve the current Observation System IP Address and
Port Number from the DDNS Server.
9. OK / CANCEL - Press OK to accept the current screen, or press CANCEL to exit.

SAVE Tab

1
2
3
5
1. CIRCULAR MONITORING INTERVAL - Sets up Sequential display length for the cameras
(between 10 seconds to 19 seconds).
2. SCAN RATE - Selects the Fast Forward speed (FF) for video playback to 1x, 2x, 4x, 16x or 64x.
3. SET PATH - Choose a directory to save video onto the local PC. If no path is set, the program
will save the files to the C:\PrograM Files\Remote_J2K directory.
4. SELECT LOCATION (...) - Allows the user to navigate and set a different save directory on the
local PC.
5. RUN IN FULL SCREEN MODE - Sets the interface to load to the size of the entire screen.
Lorex Client 5.0 Software
4
11