Steren SHOME-140 - Wi-Fi Switch Manual

Before using the product, carefully read this instruction manual to avoid any malfunction.

The information is presented only as a reference on the product; Due to updates there may be differences.

Check our website www.steren.com for the latest version of this manual

• This device is not intended for use by persons (including children) whose physical, sensory or mental abilities are different or reduced, or lack experience or knowledge
• Children should be supervised to ensure that they do not use the device as toy.
• Do not try to open the equipment; may cause a malfunction and will void the warranty.
• Do not install it in places with high temperatures, excess humidity, under sunlight direct or close to equipment that generates heat, or in the open.
• Do not place heavy objects on the switch.
• Do not use chemical or corrosive products to clean it.
• Do not expose the switch to water or humidity conditions.
• Cut off the power supply to make the connections; when you restore it, avoid touch the terminals.

Operation of this equipment is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference, including interference that may cause undesired operation.

To carry out this instruction, a device with the Android 8.0.0 operating system and the Steren Home version 1.0.1 application was used. The configuration and functions may vary depending on the version of the application and the operating system used.

INSTALLATION

1. Remove the lids at each end.
   
   
2. Make the connections as shown in the diagram.
   The light of the switch will flash slowly in blue
3. Place the covers and fix them with the screws.
   

INSTALLATION AND REGISTRATION OF THE APP

Enter the application store of your smartphone, to download and install the Steren Home app.

The instructions and operation may vary if there are updates in the application.

1. Open the application and select Crear cuenta nueva
   
   
2. To register your account, select the country and enter your phone number or your email address. When finished, tap on the option Obtenga el código de verificación.
   
   
3. Enter the code, and create a password. Press Finalizado to complete the process.
   

HOW TO USE

Set the minutes or hours so that, in countdown, the switch is turned off or on.

Just move the hand: first the hours and then the minutes. Press Aceptar to confirm.

• To program it to turn off, it must first be turned on.
• To turn on, it must first be turned off.

Schedule

Add an automatic on or off schedule.
Press Añadir temporización. Then, set the time and status of the switch (On / Off) and select Guardar.

SHARE CONTROL OF THE DEVICE

In order to share the control of this device with another person, you must have previously installed the application and created an account.

1. Select the icon on the upper right side, to access the settings
   
   
2. Press Compartir Equipo, and next Añadir lo compartido.
   
   
3. Enter the email or phone number of the person with whom you will share the device; press Finalizado.
   
   In the main screen of your contact, the device will be added automatically and you can start controlling it.
4. To check which contacts you share the device with, go back to the previous screen.
   

Operating voltage: 100 – 240 V~ 50 – 60 Hz 10 A max.
Maximum load: 1 000 W
Stand-by power consumption: 0.1 W/h
Wi-Fi frequency: 2.4 GHz
Standard: IEEE 802.11 b/g/n