Advertisement
"CONSOLES" Button - Placing and Answering ODC Master to Master Calls
If an operator wants to call another operator console, they would select the CONSOLES
Icon and the above screen would appear.
In the example this console is Operator #2 and is programmed to be able to contact
Console 1, 3, and 4. However, Only Console #2 and #4 are currently connected to the
system. To initiate a conversation with consoles #4, select the Icon and the following
screen appears. If console #4 accepts the call by answering it the operators can speak to
each other just like talking to a remote.
As with any other call, when the conversation is finished press "END CALL".
6/9/2021
Tech Works MC-IP-ODC-TS User Guide
Page 5 of 8
Advertisement
