Lorex L224 Series Instruction Manual page 23

4.7 ADVANCED MENU ___DETECTION
4.7 ADVANCED MENU ___DETECTION
Move the cursor to "DETECTION" and press "ENTER". The screen will show the following
options.
1) DETECTION SETUP:
TITLE DET
01 ON
02 ON
03 ON
04 ON
a) TITLE:
Show the camera title of each channel.
b) DET:
Select "ON" to activate the motion detection function of the selected channel.
Select "OFF" to inactivate the motion detect function of the selected channel.
c) AREA:
Press the "ENTER" button to set the detection area.
Pink blocks represent the area that is not being detected while the transparent blocks
are the areas under detection.
Press "ENTER" to confirm the
start area
Multi-detection areas
DETECTION
DETECTION
DETECTION SETUP
DETECTION TIMER
DETECTION DETECTION
AREA LS
SETUP 07
SETUP 07
SETUP 07
SETUP 07
Press ◄ or ► to choose the
width of the area
Press "－" to set the whole
area under detection
SS TS
03 02
03 02
03 02
03 02
Press ▲ or ▼ to choose the
height of the area, and press
"ENTER" again to confirm.
17
RE
10
10
10
10
Press "＋" to set the whole
undetected
ALARM
OFF
LOW
HIGH
OFF