Yamaha RX-V395 Owner's Manual page 39

Applying a digital sound field processor (DSP) effect to an audio source
2
Press the component selector button AMP<TUNER> on the
remote control transmitter.
1
Follow steps 1 to 6 of the procedure shown in "TO
PLAY A SOURCE" on page 22.
2
Select a program that is suitable for the source.
PRO LOGIC ENHANCED
PRO LOGIC
The selected mode indicator lights in the display.
3
If desired, adjust the delay time and the output level of
each speaker. (For details, refer to the descriptions on
pages 38 and 39.)
l6
20 l2
28 8
40 4
60 2
0
–dB
Notes
Program selection can be made to individual input sources.
Once you select a program, it is linked with the input source
selected at that time. So, the next time you select the input
source, the same program is automatically recalled.
If you prefer to cancel the DSP, press the EFFECT button.
The sound will be the normal 2-channel stereo without
surround sound effect.
When CONCERT VIDEO, MONO MOVIE, TV SPORTS,
DISCO, ROCK CONCERT or CONCERT HALL is selected,
no sound is heard from the center speaker.
When a monaural sound source is played with DOLBY PRO
LOGIC or DOLBY PRO LOGIC ENHANCED, no sound is
heard from the rear speakers.
When this unit's Dolby Pro Logic Surround decoder is used,
if the main-source sound is considerably altered by
overadjustment of the BASS or TREBLE control, the
relationship between the center and rear channels may
produce an unnatural effect.
To select a DSP program on the remote control transmitter,
first turn the DSP on so that a program name lights up in the
display by pressing the EFFECT button. Next, select a
desired DSP program by pressing the PRG+ or PRG–
operation buttons.
2
37