1-4. Duct type (setting by DIP switch)
By using some components on the PCB, you can change the function settings.
Related components on the PCB and the applicable settings:
DIP switch
¢ Component location
Components on the indoor unit main PCB used for the function settings are located as shown in
the following figure.
1-4. Duct type (setting by DIP switch)
Component
1
2
SW100
3
4
1
SW101
2
3
SW101
3
2
1
SW100
4
3
2
1
Remote controller address setting
Setting change prohibited
Setting change prohibited
Fan delay setting
- (05-9) -
Setting content
1. Function settings