Gardner Denver THOMAS SK927 Quick Start Manual

FILTER REPLACEMENT
1. Remove filter cap.
2. Remove old filter and discard.
3. Wipe inside of filter body and cap with a clean soft cloth.
4. Place new filter inside of filter body.
5. Replace cap.
Filter Cap
Filter
3524 Washington Avenue, Sheboygan, WI 53081 USA
(920) 452-4891 www.gd-thomas.com
Filter Body
MODEL SK927
COMPRESSOR SERVICE KIT
For service to 917/927 Series Compressors
CAUTION:
Improper assembly or use of damaged parts may lead to
premature failure. To avoid frequent repairs follow these assembly
procedures.
NOTE:
Before you begin read these instructions thoroughly. Assemble the
necessary tools. You will need a flat tip and phillips head screw driver as well as a
T-20 and T-25 Torx driver for a torque wrench.
WARNING:
Unplug the compressor before beginning disassembly.
ALWAYS NOTE POSITION AND ORIENTATION OF PARTS AS REMOVED
TO ASSURE CORRECT POSITIONING WHEN REASSEMBLING.
625444 Head Screws
(6)
625223 Valve Plate
Screws (5)
641034 Filter
608212 Diaphragm
Part No.642650B 02/07
633560 Gasket O-Ring
621102 Valve Flapper
Intake & Exhaust (2)
617045 Valve Keeper
Strip (2)
625160 Valve Flapper
Screws (2)
625540 Diaphragm
Hold Down Screws (4)
©2007 Printed in U.S.A
All Rights Reserved