Table of Contents
Advertisement
en Basic settings
Basic setting
Wi-Fi
Remote Start
Factory setting
1
Factory setting (may vary according to model)
15.2 Changing basic settings
Press
.
1.
To open the basic settings, press
2.
for 3 seconds.
a The display shows Hxx.
36
Display text Selection
Cn0
Cn0 - Cn1
rc1
rc0 - rc2
rE
Start with
YES
Confirm with
Description
Switch the wireless network
connection on or off.
Level "Cn0" switches the
wireless network connection
off.
The basic setting "Wi-Fi" is
only available once the ap-
pliance is connected to the
Home Connect app.
→ "Home Connect ",
Page 37
Activate or deactivate
→ "Remote Start ",
Page 38.
The following settings are
possible:
¡ With the setting "rc0", the
function is permanently
deactivated.
¡ With the setting "rc1", the
function can be selected
via the
→ "Activating Remote
Start ", Page 38
¡ With the setting "rc2", the
function is permanently
activated.
This basic setting is not
available until after you have
connected the device with
the Home Connect app.
→ "Home Connect ",
Page 37
Restore changed settings to
the factory settings.
The settings for initial start-
up must be configured.
a The display shows
Press
3.
the display shows the required set-
ting.
Press
repeatedly until the dis-
4.
play shows the right value.
button.
.
repeatedly until
Advertisement
Table of Contents
