Lorex mCAM DVM5031 User Manual page 2

Connect the USB end of the Camera (powered by your computer) into
3
your computer's USB Port
Color Camera
with 6ft USB
Cable
Restart your Computer
5
Note: Restart your computer before opening
the mCAM application
Information in this document is subject to change without notice. As our products are subject to continuous improvement, Lorex Technology and our subsidiaries reserve the right to
Page 2
modify product design, specifications and prices, without notice and without incurring any obligation. E&OE © 2006 LOREX. All rights reserved.
DVM503
Version # .0
6
Back of a Computer
6
SETTING UP YOUR mCAM
Follow the New Hardware Wizard dialog boxes to install the new hardware.
4
Select NO, not this time in the Hardware Wizard screen followed by pressing the
Next button. Select the Install the Software automatically (recommended)
button, and when prompted click the Finish button
For systems with Media Center
a
Open the Media Center Application Software
Select More Programs and Select Lorex mCAM
b
WWW.LOREXCCTV.COM
Proceed to Step 8