Subscribe to Our Youtube Channel
Related Manuals for CPG 351WOKR13L
Summary of Contents for CPG 351WOKR13L
- Page 1 User Manual 351WOKR13(L/N) Gas Powered Wok Ranges 12/2021 Cooking Performance Group www.cookingperformancegroup.com...
-
Page 2: Table Of Contents
User Manual 351WOKR13(L/N) Congratulations on your purchase of Cooking Performance Group commercial cooking equipment! At Cooking Performance Group, we take pride in the design, innovation, and quality of our products. To ensure optimal performance, we have outlined the following instructions and guidelines in this manual carefully for your review. -
Page 3: Safety Precautions
• Improper installation, adjustment, alteration, service or maintenance could lead to property damage, injury or death. Read the installation, operating and maintenance instructions thoroughly before installing or servicing CPG equipment. This manual must be retained for future reference. • A factory authorized agent must handle all maintenance and repair. -
Page 4: Assembly Instructions
2. Attach the control valve handle to the front of provided screws in each. (Fig. 1) the unit with the provided screw. (Fig. 2) Fig. 1 Fig. 2 Specifications 351WOKR13L 351WOKR13N Exterior Dimensions 17½" x 24" x 34" Packing Dimensions 18" x 23" x 23"... -
Page 5: Startup
This range uses starting orifice elevation sizes of #56 for NG and #67 for LP. Gas Elevation Guide Under Under Under Under Under 3,000 ft. 6,000 ft. 7,000 ft. 9,000 ft. 10,000 ft. 351WOKR13L Under Under Under Under 2,000 ft. 5,000 ft. 8,000 ft. 10,000 ft. 351WOKR13N www.cookingperformancegroup.com... - Page 6 User Manual 351WOKR13(L/N) Startup Manual Shut Off Valve • The installer supplied valve must be installed in the gas service line ahead of the appliance regulator in the gas stream and in a position accessible in the event of an emergency. Pressure Regulator •...
-
Page 7: Operating Instructions
User Manual 351WOKR13(L/N) Operating Instructions Initial Pilot Lighting • All Cooking Performance Group appliances are adjusted and tested before leaving the factory, effectively matching them to sea level conditions. Adjustments and calibrations to assure proper operation may be necessary on installation to meet local conditions or adapt to low gas characteristics; correct possible problems caused by rough handling or vibration during shipment and are to be performed only by qualified service personnel. - Page 8 User Manual 351WOKR13(L/N) Operating Instructions Gas Type Conversion • NOTE: Maintenance must be performed by an authorized service technician 1. Turn off range, remove all objects, and disconnect energy source. 2. Remove control panel, cooking grates, pilot light head, and burner. 3.
-
Page 9: Cleaning & Maintenance
User Manual 351WOKR13(L/N) Cleaning & Maintenance Daily Maintenance Stainless Steel 1. All stainless steel body parts should be wiped regularly with hot soapy water during the day, and with a liquid cleaner designed for this material at the end of each day. Recommended cleaning agents are Noble Chemicals Sunbright and Noble Chemical Blast. -
Page 10: Troubleshooting
User Manual 351WOKR13(L/N) Troubleshooting Issue Possible Causes Remedies Contact local gas supply Insufficient gas pressure in pipe department Pilot not lighting Nozzle occlusion Dredge nozzle Contact local gas supply Insufficient gas pressure in pipe department Nozzle occlusion Dredge nozzle Pilot ignited, but not the main burner Gas control valves broken Replace control valves...
Need help?
Do you have a question about the 351WOKR13L and is the answer not in the manual?
Questions and answers