Features; Operation; Introduction; Initial Inspection - OPTILAB NLFS-L-B User Manual

NLFS-L-B User's Manual

1.4 Features

•
•
•
•
•

2. Operation

2.1 Introduction

This chapter describes how to operate the NLFS-L-B unit and
discusses the location and function of the controls and connectors.

2.2 Initial Inspection

Your NLFS-L-B rackmount was carefully inspected before it left the
manufacturer. It should be in proper working order upon receipt.
You should, however, inspect the unit for any damage that may
have occurred in transit. If the shipping container or the packing
material is damaged, keep it until the contents of the shipment
have been checked to be free of mechanical and electrical
damages. Notify Optilab, LLC promptly if any notable damage is
found.
Each NLFS-L-B shipment should include the following:
Optilab, LLC
600 E. Camelback Road, Phoenix, AZ 85012
Phone: 1-602-343-1496, Fax: (602) 343-1489, Email: sales@oequest.com
External cavity laser diode
Narrow linewidth
1569 nm to 1608 nm tunable laser wavelength
4 to 40 mW tunable laser output power
LCD touch screen monitor and remote control
• NLFS-L-B laser benchtop unit
• Test Datasheet
• AC Power Cord
• USB cable
• Interlock
• Key Switch
Page 2 of 13