Table of Contents
Advertisement
AUTO
The function automatically adjusts the
fan speed level based on the selected
heat setting level of the hob.
When you use the hob for the first time,
the function is usually activated by
default.
You can activate the function while the
hob is on but none of the cooking zones
are active, or at any point during the
cooking session.
If you activate the function
while the hob is off, none of
the cooking zones operate
and there is no residual heat
visible on the control panel,
the function will switch off by
itself after a few seconds.
1. Press and hold
hob.
2. Press AUTO to activate the function.
A signal sounds and an indicator above
the symbol appears.
Automatic modes - fan speed levels
Hood
Residual heat level (hob is
mode
off)
0
H1
-
-
H2
-
-
H3
-
-
H4
-
If you deactivate the hob
while AUTO is running, the
function will be remembered
for the next cooking session.
Hood timer
Use the function to specify how long the
hood should operate.
It is not possible to set the hood timer
while the hood is deactivated.
to activate the
Residual heat level (hob
is on)
-
-
-
-
-
-
1
1
3. Place cookware on the hob and
select a heat setting level. Increase
or decrease the heat setting level as
needed.
The hood will react to the heat setting
level, increasing or decreasing the fan
speed level accordingly. The indicators
above the hood control bar appear.
4. Press 0 on the hob control bar to
deactivate a cooking zone or
deactivate the hob.
If the residual heat indicator appears,
AUTO will continue to adjust the fan
speed. If the remaining heat is low,
Breeze might start operating as well.
5. To deactivate the function during
cooking and switch to the manual
mode of the hood, press AUTO or
any other setting on the hood control
bar.
A signal sounds and the indicator above
the symbol disappears.
-
-
-
1
1
1
1
2
1. Press
next to the hood control
bar.
2. Press
or
to set the time (00-99
minutes).
3. Press
to start the timer.
The timer begins to count down.
• Once the timer finishes counting
down, the hood stops operating.
• It is possible to set the hood timer
while AUTO is on. If AUTO
deactivates the hood before the set
time runs out, the timer will be reset.
ENGLISH
15
to
Boiling Frying
-
1
1
1
1
2
2
3
Advertisement
Table of Contents
