Hover-1 DRIVE Operation Manual page 14

Table of Contents

Advertisement

FAILURE TO FOLLOW ANY OF THE FOLLOWING SAFETY
PRECAUTIONS MAY LEAD TO DAMAGE TO YOUR DRIVE, DAMAGE
TO PROPERTY, VOID YOUR MANUFACTURER WARRANTY, AND MAY
CAUSE SERIOUS BODILY INJURY OR DEATH.
Before using your Drive, be sure to familiarize yourself with the operating
procedures.
OPERATING YOUR DRIVE
Make sure the Drive is fully charged before initial use. For charging
instructions, please refer to "CHARGING YOUR DRIVE" on page 19.
Stand directly behind your Drive and place one foot on the corresponding
foot mat (as shown in the diagram below). Keep your weight on the foot
that is still on the ground, otherwise the Drive may begin to move or
vibrate, making it di icult to step on evenly with your other foot. When you
are ready, shift your weight to the foot already placed on the Drive and
step on with your second foot quickly and evenly
.
Find your center of gravity. If your weight is distributed correctly on the
foot mats and your center of gravity is level, you should be able to stand
on your Drive just as if you were standing on the ground.
On average, it takes 3 5 minutes just to get comfortable standing on
RIDING YOUR DRIVE
NOTES:
Stay relaxed and step on quickly, con idently,
and evenly. Imagine climbing stairs, one foot,
then the other. Look up once your feet are even.
The hoverboard may vibrate or spin in one
direction if weight and pressure are applied to
only one foot mat. THIS IS NORMAL.
12 12

Advertisement

Table of Contents
loading

This manual is also suitable for:

H1-drive

Table of Contents