Listening To Music - Hover-1 i-100 Operation Manual

BLUETOOTH SPEAKER
®
The i-100 hoverboard has a powerful built-in wireless speaker, so you can
play your music while riding.
PAIRING THE SPEAKER
1) Turn on your hoverboard. The speaker will "ping" to announce that it's
waiting for a Bluetooth connection. This will indicate your hoverboard's
®
speaker is now in pairing mode.
2) Place the hoverboard and the Bluetooth device you would like to pair
®
within the operating distance. We recommend keeping the two devices no
further than 3 feet (1 meter) apart during pairing.
3) Ensure Bluetooth is enabled on your phone or music device. Refer to
®
the manufacturer's instructions for how to enable Bluetooth on your
®
device.
4) Once you have activated Bluetooth on your device, select the option
®
"H1 100" from the list of available Bluetooth devices.
®
5) If prompted, enter the PIN code "000000" and con irm the entry.
6) The speaker will say "paired" when successfully paired.
7) Please note, pairing mode on the hoverboard will last for two minutes. If
no devices are paired after two minutes, the hoverboard speaker will
automatically return to standby mode.
8) If pairing is unsuccessful, turn o the hoverboard irst and try again
following the previous steps.
9) If your smartphone is out of range, or the battery is low on your
hoverboard, the speaker may disconnect from your device, and the
speaker will say "disconnected." To reconnect, follow the previous steps, or
recharge your hoverboard.
NOTE: Once you have paired the hoverboard speaker with a device, the
speaker will remember the device and will pair automatically when the
device's Bluetooth is activated within range. You do not need to re-pair any
®
previously connected devices.
Your hoverboard can pair with up to two multi-point devices at a time. You
can reconnect a previously paired device without going through the
pairing process for up to two devices.

LISTENING TO MUSIC

Once the Bluetooth speaker is paired to your device, you can stream
®
music wirelessly through it. Select the track you wish to listen to on your
device. All volume and track controls will be made using your music
device. Should you encounter any problems while streaming, please refer
to your device's user manual.
7