How To Remove A Paired Smart Sensor From A Gateway; How To Move A Paired Smart Sensor To A Different Gateway - Omega GW-001 Series User Manual

8.4

How to Remove a Paired Smart Sensor from a Gateway

To remove a paired Smart Sensor (such as the SS-001) from a Gateway, follow the steps below:
Step 1: Log in to the Layer N Cloud account associated with the
paired devices.
Step 2: From the Layer N Cloud device readings page, identify the
Smart Sensor that will be removed, and click the Trash Can
icon .
8.4.1

How to Move a Paired Smart Sensor to a Different Gateway

To move a paired Smart Sensor (such as the SS-001) to a different Gateway, follow the steps below:
Note:
Step 1: Navigate to the Layer N Cloud Portal that is associated with the Smart Sensor and remove the Smart
Sensor from the account.
Step 2: Ensure the unit is being powered with either a USB connection or batteries. Press and hold the
Pairing Button on their Smart Sensor for 8 seconds so that the LED Status Indicator blinks red to
factory reset the device, then release the pairing button.
Note:
After the factory reset, the LED Status Indicator on the Smart Sensor will turn Amber/Orange indicating the
device is in pairing mode and is ready to be paired to a new Gateway.
When moving a paired Smart Sensor to a different Gateway, alarm and event thresholds may be
triggered and notifications based on user preference may be delivered. Notifications sent as a
result of the re-pairing process may be disregarded.
The Pairing Button for the SS-001-RUG is in a pinhole on the underside of the device. Use a
paperclip to press and hold the pairing button for 8 seconds so that the LED Status Indicator
blinks red to factory reset the device, then release the pairing button.
Figure 50: Layer N Cloud UI Smart Sensor readings
34 | M 5 7 9 0