Table of Contents
Advertisement
6 Registering your Gateway to OEG (Enterprise Mode)
A Layer N Gateway can be added to Omega Enterprise Gateway (OEG) in a non-internet environment by enabling
Enterprise Mode on the Gateway unit. To add a Layer N Gateway to OEG, the Cloud Registration option needs to be
disabled by accessing the System Settings in the Gateway web UI. Once disabled, the gateway will be in Enterprise
Mode.
Important:
If the OEG License being used has not been activated, an internet connection will be needed for a one-
time license activation before proceeding. Adding a Layer N Gateway as a Device to OEG is only available
on non-trial licenses of OEG.
Step 1: Navigate to the Security Settings in the Gateway UI.
Step 2: Click the Turn Off Cloud Registration checkbox to disable the feature and set the GW-001 to Enterprise
Mode.
Step 3: Click the Update button to save the setting change. The gateway LED will flash orange 3 times indicating the
device is in Enterprise Mode.
Note:
The GW-001 may be configured to use a Static IP rather than the default DHCP. If these settings are changed,
the PC or local-area network router must be on the same local-area network as the Static IP address assigned
to the GW-001 unit.
If the GW-001 will be moved and connected to a local-area network, it should be moved now and connected directly
to a DHCP-enabled, local-area network router or local-area network PC.
Step 4: Launch and log in to your Omega Enterprise Gateway account.
Figure 18: Gateway UI Security Settings – Turn off Cloud Registration
16 |
M 5 7 9 0
Advertisement
Table of Contents
