Table of Contents
Advertisement
5.1.2
DAQ
To add a DAQ device,
select it from the
Product Family
dropdown and select
your Product Model
from the dropdown.
You can then set the
communication
parameters for your
device including
interface type, IP
address, port number,
device ID, and reading
interval.
Omega DAQ devices require users to know the IP address of their controller device. An IP scanner software
can be used to identify the DAQ IP address.
5.1.3
Meter
To add a Meter device,
select it from the Product
Family dropdown and
select your Product
Model from the
dropdown. You can then
set the communication
parameters for your
device including the
interface type, baud rate,
data bits, stop bits, parity,
device ID, and reading
interval.
Figure 11: DAQ series Add Device interface
Figure 12: Meter Add Device interface
12 |
M 5 7 9 0
Advertisement
Table of Contents
