Table of Contents
Advertisement
It is possible to store the DataDisk MIDI parameters (MIDI Echo, MIDI
Program Change Channel, MIDI Sync, and MIDI Filter) to disk. When a
new disk is loaded, the MIDI setup will be automatically loaded as well.
This means that the MIDI setup can be unique per disk.
The display will then return to the current MIDI page.
PLEASE NOTE:
MIDI setup is stored on the inserted disk, the current MIDI parameter
settings in
MIDI setup stored on it, all MIDI
Get user manuals:
See SafeManuals.com
DATADISK MIDI
SETUP PER DISK
TO STORE THE DataDisk MIDI
1)
Press the
button. The display will read:
MIDI
MIDI ECHO
2)
After setting the DataDisk MIDI parameters as desired (see
page 35 of the DataDisk user's manual), press the
while on any MIDI page to store any MIDI parameters to disk. The
display will temporarily read:
MIDI Parameters
Stored
the DataDisk will not be altered.
b)
If the DataDisk is powered-on with a disk that has no
STORAGE OF
PARAMETERS TO DISK
OFF
parameters will default to OFF.
65
APPENDIX
button
DO/YES
a)
If
no
Advertisement
Table of Contents
