To Backup An Entire Disk - Alesis DATADISK Reference Manual

PLEASE NOTE:
—
If the backup disk contains a file with same name as the file se-
lected to be backed up, the display will prompt:
Pressing the
backup disk, before starting backup.
function will exit the backup.
—
Backup can be aborted at any time by pressing any other func-
tion button.
Get user manuals: See SafeManuals.com
REPLACE FILE
WITH SAME NAME?
button will proceed to delete the file on the
DO/YES

TO BACKUP AN ENTIRE DISK

1) Press the
BACKUP
will read:
BACKUP XXXXXX
YYYYYY ZZZZZZZZ?
In this display, XXXXXX is an abbreviation of the manu-
facturer's name of the device sending the data, YYYYYY
is an abbreviation of the model name, and ZZZZZZZZ is
the name of the file to be backed up.
2) Press the
BACKUP
read:
BACKUP
FILES TO DISK?
3) Press the button. The display will then read:
DO/YES
XX DISK SWAPS
REQUIRED. OK?
XX is the number of times that the source (the disk cur-
rently in
DATADISK
you will backup your file to) must be inserted and re-
moved from the disk drive.
4) Follow steps 4 through 9 as in "To Backup A File".
Pressing any other
button on the front panel. The display
button a second time. The display will
ALL
) and destination disks (the one that
43
REAL TIME MIDI SEQUENCING