Target Unit Not Responding - Alesis DATADISK Reference Manual

SECTION 4
This display occurs when the Data Disk sends a file to an instru-
ment that requires handshaking and receives no handshaking re-
sponse.
PLEASE NOTE: There are safeguards to prevent against tricking
the
DATADISK
example:
CAUTION: If the user tries to trick
DATADISK
safe as long as you don't swap disks while in Receive mode without
pressing the Receive button after inserting a new disk!
Get user manuals: See SafeManuals.com
TARGET UNIT NOT
RESPONDING
by swapping disks before initiating an operation. For
1) With disk A in the drive, press the
2) Eject disk A: insert disk B.
3) When you press
will realize that the disk in the drive is different
DATADISK
from the original and will just load the new disk's
directory and re-enter the Send function.
will not be able to load or read back the data. You're
button.
SEND
to initiate an operation,
DO/YES
in Receive mode,
DATADISK
26
TARGET UNIT NOT
RESPONDING