Baxi DSGNW 25 User Manual page 12

Pressing the "TIMER" button again activates the off timer.
3
7. "HEALTH" button
Pressing this button activates the "HEALTH" function.
8. "SLEEP" button
When you press the "SLEEP" button, the night mode indicator on the indoor unit
flashes.

When night mode (SLEEP) is activated, the cooling mode automatically
increases the set temperature by 1 °C after 1 hour and another 1 °C after
another hour.

When night mode (SLEEP) is activated, the heating mode automatically
decreases the set temperature by 2 °C after 1 hour and another 2 °C after
another hour.

The air conditioner works in night mode (SLEEP) for 7 hours and stops
automatically.

N.B. If you press the "MODE" or "ON/OFF" buttons, the remote control turns
night mode (SLEEP) off.
9. "iFEEL" button
Pressing this button activates the "iFEEL" function.
remote control display shows the current room temperature. If is it not activated, the
remote control display shows the set temperature. This function is incompatible with
fan mode (FAN).
10. "DISPLAY" button
Press this button to turn the indoor unit display on/off.
11. "iCLEAN" button

With the remote control "OFF", press the "iCLEAN" (self-cleaning) button. The
fins that guide the flow of air go back to their initial position in cooling mode and
the unit activates the "iCLEAN" function for a maximum of 35 minutes. The aim
of this function is to remove the dust from the evaporator and dry the water
contained in it, so as to prevent the formation of mould and consequent bad
smells.

After activating the "iCLEAN" function, pressing the "iCLEAN" or "ON/OFF"
buttons cancels the function and reactivates the air conditioning.

If you do not perform any operation, the self-cleaning function remains active for
a maximum of 35 minutes.
N.B. The "iCLEAN" function can be activated simultaneously with the on timer.
In this case, the on timer starts after the end of the "iCLEAN" function.
12. "ELE.H" button
(Only for heat pumps with additional electrical supply).
In heating mode, pressing this button will change the operating mode, using the
additional electrical supply.
13. "Anti-FUNGUS" button

Pressing this button turns the "Anti-FUNGUS" function on or off.
When this function is enabled, the
12