Download
Share
Print this page
SALICE F70 Manual
  1. Manuals
  2. Brands
  3. SALICE Manuals
  4. Indoor Furnishing
  5. F70 Clips
  6. Manual

SALICE F70 Manual

Hide thumbs Also See for F70:

Advertisement

Quick Links

Download this manual
F70
ENGLISH

Advertisement

loading

Related Manuals for SALICE F70

Summary of Contents for SALICE F70

  • Page 1 ENGLISH...
  • Page 3 F70 PUSH page 27 Runner for drawers with Push opening system for side thicknesses up to 16 mm ACCESSORIES page 31 Synchroniser for F70 Push runners page 32 Drawer drilling templates page 35 Lever for the tilt adjustment page 37...
  • Page 4 F70 is equipped with direct and intuitive tool-free adjustment of side, depth, height and tilt of front panel. Its features and distinctive elements make F70 a complete runner, suitable to meet all needs and usable in a wide variety of furniture and room settings: from the kitchen to the bathroom, as well as living spaces, bedroom, office, and wherever a versatile product is needed with extreme durability and high load-bearing capacity.
  • Page 5 The F70 runner is also available in the version with integrated Push opening system, for all handle-less drawers. A slight pressure of the drawer frontal is sufficient for the Push mechanism to release and consequently for the drawer to self-open with minimum effort.
  • Page 6 The adjusters for height and tilt (optional) of the drawer frontal are located on the runner. Rack system All versions and lengths of F70 have an integrated rack system, which synchronises the three sliding elements of the runner and guarantees excellent lateral stability and a perfectly silent sliding movement without the need for further components.
  • Page 7 Fixing Fixing of the full-extension runner on the cabinet side ø 4 ø7 -0.2 ø 6.3 EUROSCREW Pre-drilling ø 5 mm +/- 4.5 +0.5 ø7 -0.2 Screws, see page 37. If the fixing of the runners is carried out before the assembly of the cabinet, we recommend that the inset position of the runner is increased from 38 to 39 mm to accommodate the manufacturing tolerances in the cabinet and the runner.
  • Page 8 Drilling positions for runner on cabinet side MIN 360 The use of at least 4 fixing screws for each runner to the cabinet side is highly recommended. MIN 410 MIN 460 MIN 510 MIN 560 MIN 610 MIN 660 MIN 710 MIN 760 On longer lengths load capacity may vary.
  • Page 9 Drawer setting Abbreviations CHEST OF DRAWERS SP = Thickness of the drawer side LC = Depth of the drawer PM = Depth of the cabinet = Internal width of the cabinet LN = Nominal runner length The internal width of the drawer is 42 mm less than The external length of the drawer is the internal width of the cabinet 10 mm less than the runner length...
  • Page 10 Drawer drilling 3-SIDED drawer 4-SIDED drawer REAR HOOK 40 mm MIN 75 mm MIN with Synchroniser for Push runners or with Lever for the tilt adjustment Use SGD704UGXA drilling template for rear hook, Synchroniser for Push runners, see page 32. see page 35.
  • Page 11 Part number composition Example: G7E6 _ _ _ _ XXB BASIC PART NUMBER ARTICLE VERSIONS RUNNER LENGTH S = SMOVE (350 - 400 - 450 - 500 - 550 - 600 - 650 - 700 - 750 mm) P = PUSH Industrial packing PALLET PALLET...
  • Page 13 Fixing clip...
  • Page 14 F70 - Fixing clip - For all F70 runner versions - Material: plastic and steel - Integrated tool-free side and depth adjustments - Recommended pre-drilling ø 2,5 mm - Fixing to the bottom or to the frontal of the drawer Dimension of the clip and drilling position 95 min.

  • Page 15: Drawer Removal

    Drawer fixing Place the drawer on the runners and push forward until completely closed Drawer removal Open the drawer completely, press the indicated lever and slide the drawer out of the cabinet...
  • Page 17 Adjustments...
  • Page 18 Sideways adjustment +/- 1,5 mm Rotate the white wheel towards the drawer frontal to adjust left. This operation is tool free. 1.5 mm Rotate the white wheel towards the back of the drawer to adjust right. This operation is tool free. 1.5 mm For sideways adjustment, it is recommended that the adjusters on the clips are operated in the same direction, in order to maintain the correct alignment and movement of the runners.
  • Page 19 Depth adjustment +/- 3 mm Rotate the white wheel towards the outside of the drawer to increase the gap between the frontal and the side. This operation is tool free. + 3 mm Rotate the white wheel towards the inside of the drawer to reduce the gap between the frontal and the side. This operation is tool free.
  • Page 20 Height adjustment + 2.5 mm Push the lever towards the inside of the drawer to achieve height adjustment. This operation is tool free. 2.5 mm...
  • Page 21 Tilt adjustment + 3 mm Open the drawer and press the lever to achieve the adjustment. This operation is tool free. + 3 mm Drawer back preparation, see page 10. Lever for the tilt adjustment AGLRXX3F, see page 37. Assembly of lever for the tilt adjustment (optional) Pull out the drawer and remove the plastic insert Insert the lever for the tilt adjustment, both right and left Rotate the lever to achieve the required adjustment...
  • Page 23 Smove Smove...
  • Page 24 F70 Smove - Full-extension runner SMOVE: FULLY INTEGRATED IN THE RUNNER, DECELERATES THE CLOSING ACTION OF THE DRAWER Product features: - Full-extension with synchronised movement of the sliding elements to guarantee lateral stability and a perfectly silent sliding movement - Available in the full range of lengths from 350 mm in 50 mm increments to 750 mm...
  • Page 25 Part number To be screw fixed BASIC PART NUMBER RUNNER LENGTH (LN) MIN. DEPTH OF THE CABINET (PM) Screws, see page 37 G7E6S350XXB G7E6S400XXB G7E6S450XXB G7E6S500XXB G7E6S550XXB G7E6S600XXB G7E6S650XXB G7E6S700XXB G7E6S750XXB AFCGXX3B Right and left clip with integrated adjustments PACKING 2 BOXES = 100 right pcs.
  • Page 27 Push...
  • Page 28 F70 Push - Full-extension runner PUSH: THE OPENING SYSTEM FOR HANDLE-LESS DRAWERS, FULLY INTEGRATED IN THE RUNNER A SLIGHT PRESSURE OF THE DRAWER FRONTAL IS SUFFICIENT FOR THE DRAWER TO SELF-OPEN Product features: - Full-extension with synchronised movement of the sliding elements to guarantee lateral...
  • Page 29 Part number To be screw fixed BASIC PART NUMBER RUNNER LENGTH (LN) MIN. DEPTH OF THE CABINET (PM) Screws, see page 37 G7E6P350XXB G7E6P400XXB G7E6P450XXB G7E6P500XXB G7E6P550XXB G7E6P600XXB G7E6P650XXB G7E6P700XXB G7E6P750XXB AFCGXX3B Right and left clip with integrated adjustments PACKING 2 BOXES = 100 right pcs.
  • Page 31 Accessories...

  • Page 32: Product Features

    F70 Push synchronizer The synchronisation system for Push-open F70 runners has been developed to ensure that drawers of any width can be opened with minimum effort. The system links the two runners, which thus become a single element; a pressure at any point of the drawer frontal (even at the extremities), is sufficient for the Push mechanism to release and consequently for the drawer to self-open.
  • Page 33 Assembly instructions Insert and slide the carrier plates into position on the runners in the direction indicated by the arrows Fitting the driver pins to the runners 75 mm MIN 75 mm MIN (X - 155 mm) ±1 X (1305 mm MAX) Cut the stabiliser bar to length (X - 155 mm) ±1...
  • Page 34 F70 Push synchronizer - Assembly instructions Fix the bar to the plates and insert the drawer A pressure at any point on the drawer frontal is sufficient for the drawer to self-open Use of bumpers not recommended for the correct...
  • Page 35 Drawers drilling templates Template for the hole for the rear hook and the pre-drilling for the clips SGD704UGXA PACKING 1 box = 20 pcs. Drilling ø 6x10 mm, for the rear hook Technical information, see page 10...
  • Page 36 Drawers drilling templates Pre-drilling ø 2,5 mm, to fix the clips to the frontal of the drawer Pre-drilling ø 2,5 mm, to fix the clips to the bottom of the drawer...

  • Page 37: Wood Screw

    Lever for the tilt adjustment AGLRXX3F PACKING 1 large box = 10 boxes (120 pairs) 1 box = 12 right pcs. and 12 left pcs. Technical information, see page 21 Wood screw V234X164I ø 4 x 16 mm PACKING 1 box = 20.000 pcs Euroscrews V136X114I drilling ø...
  • Page 38 Notes...
  • Page 39 Notes...
  • Page 40 FAX. 021 3988 9882 www.salice.com info.salice@salicechina.com SALICE ESPAÑA, S.L.U. www.salicechina.com DEUTSCHE SALICE GMBH CALLE COPÉRNICO, 11 SALICE INDIA PVT. LTD. VERKAUFSBÜRO NORD POLÍGONO INDUSTRIAL COLL DE LA MANYA RINGSTRASSE 36/A30 CENTER 08403 GRANOLLERS (BARCELONA) 1001 & 1002, 10TH FLOOR, 32584 LÖHNE TEL.