SALICE F70 Clips Quick Start Manual
Locking devices
Hide thumbs
Also See for F70 Clips:
- Installation instructions manual (40 pages) ,
- Manual (40 pages) ,
- Installation instructions (3 pages)
Advertisement
Quick Links
Advertisement
Related Manuals for SALICE F70 Clips
Summary of Contents for SALICE F70 Clips
- Page 1 F70 Clips - Locking devices...
- Page 2 F70 Locking devices - Standard mount - side and depth adjustments - Dual metal/plastic construction - For all F70 runner versions - Tool free lateral and depth adjustments - Pre-drilling recommended ø 2.5 mm (3/32”) AFCGXX3B PACKAGING 2 boxes = 100 pcs right and 100 pcs left Assembly to the bottom Assembly to the sub-front drawer member Fix with screws...
- Page 3 F70 Locking devices - Vertical mount - side and depth adjustments - Dual metal/plastic construction - For all F70 runner versions - Tool free lateral and depth adjustments - Height of the sub front must be 13 mm (1/2”) - Pre-drilling recommended ø 2.5 mm (3/32”) 47.5 AFCGX43B PACKAGING...
- Page 4 F70 Locking devices - Narrow drawer clip - For use with narrow drawers - For all F70 runner versions - Height of the sub front must be 13 mm (1/2”) 46.2 AFCEX43B 110.4 152.4 (6") MINIMUM WIDTH PACKAGING 2 boxes = 100 pcs right and 100 pcs left Assembly to the bottom Assembly under the sub-front drawer member Fix with screws...
-
Page 5: Drawer Removal
Drawer removal Standard and vertical mount Position hands under the front of the drawer and press on the orange levers, as indicated in the drawing, sliding the drawer out of the cabinet. Narrow drawer clip Position hands under the front of the drawer and press on the black levers, as indicated in the drawing, sliding the drawer out of the cabinet. - Page 6 Side adjustment +/- 1.5 mm Rotate the white wheel (see drawing) towards the front of the drawer to adjust left. This operation is tool free. 1.5 mm 1.5 mm Rotate the white wheel (see drawing) towards the back of the drawer to adjust right. This operation is tool free.
- Page 7 Depth adjustment +/- 3 mm Rotate the white wheel (see drawing) towards the ouside of the drawer to increase the gap between the front and the side. This operation is tool free. Rotate the white wheel (see drawing) towards the inside of the drawer to reduce the gap between the front and the side. This operation is tool free.
- Page 8 Height adjustment + 2.5 mm Press the lever towards the back of the drawer to achieve the height adjustment. This operation is tool free. + 2.5 mm...
- Page 9 Assembly of tilt adjustment levers (optional) Pull out the drawer and remove the plastic insert, both right and left. Insert the tilt adjustment levers, both right and left. Rotate the lever to adjust. Tilt adjustment + 3 mm Open the drawer (1) and press the lever towards the back of the cabinet (2) to achieve the adjustment.