Hitachi UX2 Instruction Manual page 69

Chapter 4. Basic Operation
Note: If ink continuously splashes and soils the wiping paper even when not printing, there may be some
fault in the print head, such as the ink stream not entering the gutter or the ink not being recovered from
the gutter. In this case, stop the operation using the following no-cleaning stop procedure.
No-cleaning stop procedure
Press Shutdown at the bottom right of the [HOME] screen.
Press Shutdown.
Press No-cleaning stop.
This no-cleaning stop procedure is possible even while the startup sequence is being executed.
If you stop the unit with this procedure, restart the operation according to "4.2.2. When Error Occurs at
Start of Operation".
4-15