Table of Contents
Advertisement
OPERATING INSTRUCTIONS
16
Auto Dry Function
1
Auto dry function can be setted/released
by manipulating indoor unit button or
remote control.
2
When pressing the
the function, evaporator in indoor unit will
be automatically dried as showing counting
00 to 99 on its display panel.
3
After indicating 99 on the display panel,
the unit will be automatically turned off.
* Auto dry function is released at initial
state as standard.
For Setting Auto Dry Function
If manipulating indoor unit, press the
Ñ
button and
button simultaneously for 3
seconds.
If manipulating remote control for Cooling
Ä
Only model, press
The indoor unit will respond with beep once
and indicate "SC" on its display panel. Then
Auto dry function will be set.
For Releasing Auto Dry Function
If manipulating indoor unit, press the
Ñ
button and
button simultaneously for 3
seconds.
If manipulating remote control, press
button. The indoor unit will respond with beep
twice and Auto dry function will be removed.
|
button after setting
|
button.
|
Ä
Airflow Setting
We can simply adjust the desired airflow
direction.
Up/Down Airflow Direction Control
|
1
Press
button to turn on the indoor.
I
2
Press
button and the louvers will swing
up and down.
I
3
Press
button again to set the horizontal
louver at the desired airflow direction.
Left/Right Airflow Direction Control
|
1
Press
button to turn on the indoor.
Press J button and the louvers will
2
swing left and right.
Press J button again to set the vertical
3
louver at the desired airflow direction.
<Airflow Setting Table>
Symbol
I
Up·Down : Vane move from up to
down automatically and continuously
J
Left·Right : Vane move from left to
right automatically and continuously
Description
Advertisement
Table of Contents
