Remote control preparation
How to mount onto a wall
1
Use the screws to secure the holder to the
wall.
2
To insert the remote control to the holder.
How to insert batteries
1
Remove the cover from the back of the
remote controller.
- Slide the cover according to the arrow
direction.
2
Insert two batteries.
- Be sure that the (+) and (-) directions are
correct.
- Be sure that both batteries are new.
PRODUCT INTRODUCTION
3
Re-attach the cover.
- Slide the cover into back position.
- Do not use rechargeable batteries such
batteries are different from standard dry
cells in shape, dimensions, and
performance.
- Change the batteries with a new one if
the remote control does not work
properly after using for an extended
period of time.
CAUTION
!
• When not using remote controller for a
long time, flowing of dry cell liquid may
cause the failure of product, therefore,
remove all dry cells.
• When replacing dry cell (AAA), replace
two of them all with new ones, and if
remote controller is not operated
properly even after replacing the dry
cells (AAA), request the service.
• Do not disassemble or re-charge the
used dry cells, and do not throw away
those at the location with heat of fire or
hot air. There will be the danger of
explosion.
11