Wireless Remote Controller - LG APNQ55GT3M2 Owner's Manual

PRODUCT INTRODUCTION
12

Wireless remote controller

<Type 1>
Handling the remote control
- Aim at the signal receptor on the floor standing type air conditioner when operating.
- Block a strong light over the signal receptor with a curtain or etc. so as to prevent the abnormal
operation. (ex: electronic quick start, ELBA, inverter type fluorescent lamp)
- Be sure that there are no obstructions between the remote control and the signal receptor.
- Do not drop or throw the remote control.
- Do not place the remote control in a location exposed to direct sunlight, or next to a heating
unit, or other heat source.
- The feature may be changed according to the type of model.
- Some functions may not be supported, depending on the model.
NOTE
Some buttons cannot be used by model's function.
Control
panel
|
You can turn the air conditioner on and off.
R
You can easily adjust the desired air speed.
J K
You can adjust the desired temperature by pressing the buttons.
You can select the desired operation mode by pressing the
appropriate button.
Mode
• Operation modes: Cooling, heating, dehumidification, air
blowing, AI
^
It automatically removes the moisture remaining inside the air
conditioner when the air conditioner is turned off.
U V
You can set up/down rotation or left/right rotation.
It can cool the indoor space at a rapid rate.
• If you wish to select power cooling, press the power mode
9/─
button after pressing the cooling button.
• If you wish to select power heating, press the power mode
button after pressing the heating button.
You can bring the effect of the power saving.
^
• Capacity may decrease when this mode is selected.
You Can check the indoor temperature.
6
• The room temperature is displayed for 3 seconds and then
returns to the previous screen.
When the lock function is set, the function won't change no
matter which button on the product is pressed.
• In operation this function, display key will be locked and air
W
conditioner indicates "CL" on its display panel whenever you
press any button.
• If you press this button for 5 seconds, you can change
temperature unit(°C/°F).
ON reservation: The air conditioner turns on automatically at the
Y
set time.
• If you press this button for 3 seconds, you can set the current
time.
T
OFF reservation: The air conditioner turns off automatically at the
set time.
Q
It cancels the set reservation.
c d
Set the desired reservation time by pressing the buttons.
SET/CLEAR You can set or cancel reservations.
*Depending on the model, the functions applied may vary.
Description